Wall Gel 10kg

Terra Imprints Wall Gel

Wall Gel is a protective barrier for structures likely to be contaminated with colour hardeners, Antique agents, concrete etc

Apply directly to the surface requiring protection, with a soft brush.

Allow the wall gel to dry prior to application of concrete and colour hardener.

Using a jet wash, remove the wall gel from the surfaces (this is usually done after the concrete has been left out to cure, over a few days).

• Wall Gel is a non-hazardous barrier gel when used as intended
• Avoid skin contact – wash contaminated area with suitable industrial cleanser or warm water and soap.
• Avoid eye contact – if contaminated, flush with eye wash or warm water for 10 minutes.
• 10 Litre Tub