Terra Imprints Wallcrete
A pre-mixed, ready to use, lightweight decorative wall render comprising of lightweight fillers, cements and lime and a unique proprietary admixture package.
Application
Ensure the background is clean and sound. Generally, especially when imprinting a pattern into the wallcrete render, a scratch coat will be required. Prior to application of wallcrete the background shoulf be thoroughly wetted with clean water and primed using Wallcrete Bonding Agent. Wallcrete Should be applied before the bonding agent dries. Once 20KG bag of wallcrete is mixed with between 4and 5 litres of water, depending on desired consistence. Apply a tight skim coat and then apply Wallcrete to the required depth. If imprinting, spray the surface with liquid release agent and gently push the chosen imprinting mat into the soft Wallcrete render and remove immediately to view the finished texture. Repeat over the entire area as the render is applied. Allow Wallcrete to harden slightly and carve the wall as required. Coloured highlights can be added to the finished surface using specialist Wallstains, and the final area can be lightly sealed.
Coverage
2.70m² @6mm / 1.35m² @12mm / 0.90m² @ 18mm
Safety
Wallcrete is a non-toxic and non-flammable. Avoid contact with the skin and eyes. Wallcrete is a blend of cements, so it is recommended that a COSHH approved dust mask be worn when handling the product. Flush affected areas with water. Contains chromium (V1). Product may cause an allergic reaction. Do not take internally. Keep out of reach of children. Refer to the Health & Safety Data Sheet for further information.
